Jowa
EQUIPMENT FOR TREATMENT OF OILY WATER |
3SEP - Oily Water Separator
No more than 15-ppm General The 3SEP OWS is a dual stage oily bilge water separation system utilizing differential specific gravity, coalescence plates and filtration to separate and remove free and emulsified oil. The unit is available in five different capacities; 0.5 m3/h, 1.0 m3/h, 2.5 m3/h, 5.0 m3/h and 10.0 m3/h. The skid is optimised so that the footprint of the 3SEP OWS is as small as possible. The 1m3/h model pictured has a footprint of only 950 x 760mm. More information
FunctionThe system is designed for a continuous flow with automatic operation. The system does not require any chemicals. The first stage removes the free oil by gravity with the help of coalescence plates. An adjustable oil sensor controls the valve for automatic oil release to the sludge tank or any other dedicated tank. The adjustable oil sensor makes it possible to minimise the amount of treatable water released to the sludge tank. In the second stage emulsified oil is removed in the two filter tanks and the ppm value is monitored by a 15-ppm bilge alarm, before the treated water is discharged overboard. The collected free oil on top of each filter tank is released automatically to the sludge tank at a pre-set interval. When a 15 ppm alarm occurs, the 3SEP OWS will automatically close the overboard line and re-circulate the treatable water to the bilge. When the contamination falls below 15 ppm the overboard valve will open again without human intervention. The system is designed as a skid assembly with all connection points collected, for easy installation. When the unit reaches the customer the only remaining thing to do is to connect water inlets and outlets and the electrical power supply, facilitating quick and easy installation onboard. Before leaving our workshop each unit has to pass a quality-test, where all functions are tested. All equipment has the highest quality; the tanks are made of acid proof stainless steel, AISI 316L. Our pumps are supplied by internationally recognised brands. Spare parts are easily available from one of our offices or representatives worldwide. Main features
|
EBU - Emulsion Breaking Unit
Separates up to 80% of the water in the emulsion General JOWA Emulsion Breaking Unit is designed to break apart water in oily water emulsions. The unit separates up to 80% of the water in the emulsion. The treated water is then fed to an MEPC 107(49) approved filter type/bilge water separator. The residue is pumped to the concentrated sludge tank. More information
Function The system is operating automatically, in a step-by-step program (PLC controlled). The working principle is flocculation.
Parameter
|
JOWA HOLLAND BV
Achterzeedijk 57 - Unit 64 2992 SB Barendrecht Telephone : +31(0)180 55 71 33 Fax : +31(0) 180 61 11 27 E-mail: post@jowa-holland.nl Sales: post@jowa-holland.nl Service department: service@jowa-holland.nl Financial Department: administration@jowa-holland.nl |
JOWA NORGE AS
Dyrmyrgata 35 NO-3611 Kongsberg NORWAY Follow us on Facebook
|